People‎ > ‎Dr. Antoni Tomsia‎ > ‎

Full list of Dr. Tomsia's invited lectures

  1. Solartron Transducers, Statham Division, Oxnard, CA, presented on January 22, 1987.
  2. Vector Cable, Division of Schlumberger Technology Corporation, Houston, Texas, presented on April 14, 1987.
  3. International Symposium on Joining Structural Ceramics organized by the American Ceramic Society in Pittsburgh on April 27, 1987.
  4. Ceramic Metal Joining, Principal Lecturer of the course organized by the American Ceramic Society on April 23 24, 1987 in Pittsburgh, and on April 29-May 1, 1988 in Cincinnati.
  5. Wetting, Surface Energetics and Reactions in Ceramic-Metal Systems, Lecturer of the course organized by the Center for Professional Advancement on June 2, 1989 in Anaheim.
  6. A series of invited lectures presented at Institute of Glass and Ceramics in Madrid, Spain, and Ciudad Universitaria, Madrid, Spain, June 1989.
  7. Two day invited seminar on "Ceramic-Metal Joining", presented at Alberox Corporation, New Bedford, Mass. on September 16 17, 1989.
  8. Department of Materials Science and Ceramic Technology, Shonan Institute of Technology, Tsujido, Japan, October 8 15, 1991.
  9. Tokuyama Soda Co., October 17, 1991, Fujisawa, Japan.
  10. Institute of Ceramics, University of Santiago, Spain, November 26, 1991.
  11. Institute of Ceramics, Madrid, Spain on November 28, 1991.
  12. Instituto Tecnológico de Materiales, Llanera, Asturias, Spain, on December 2, 1991.
  13. Ceramic-Metal Joining, Principal Lecturer of the course organized by the American Ceramic Society. Presented at 94th Annual Meeting of the American Ceramic Society, April 11-12, 1992, Minneapolis, MN.
  14. Department Lecture, Institute of Ceramics, Madrid, Spain on September 15, 1992.
  15. Ceramic Metal Joining, One week short course presented in Oviedo, Spain on September 22-25, 1992.
  16. Solid State Reactivity Conference, Nagaoka University of Technology, October 6-7, 1992, Nagaoka, Japan.
  17. Department of Materials Science and Ceramic Technology, Shonan Institute of Technology, Tsujido, Japan, October 12-14, 1992.
  18. Fujitsu Corp., October 14, 1992, Atsugi, Japan.
  19. Toshiba Ceramics Co., October 19, 1992, Hadano, Japan.
  20. ISHM/CHMT Advanced Materials Workshop, February 16, 1993, Ojai, California.
  21. Ceramic-Metal Joining, Principal Lecturer of the course organized by the American Ceramic Society. Presented at 95th Annual Meeting of the American Ceramic Society, April 17-18, 1993, Cincinnati, Ohio.
  22. 3rd European Conference on Advanced Materials and Processes, Euromat 93, Paris, France, June 9, 1993. (Invited Keynote Lecture).
  23. Gordon Research Conference, Solid State Studies in Ceramics, 15-20 August 1993, Colby-Sawyer College, New London, NH. Session Chair/Discussion Leader and poster presentation.
  24. Ceramic Metal Joining, Principal Lecturer of the course organized by the American Ceramic Society. Presented at 18th Annual Conference and Exposition on Composites and Advanced Ceramics, January 7-8, 1993, Cocoa Beach, Fla.
  25. Department of Materials Science and Ceramic Technology, Shonan Institute of Technology, Tsujido, Japan, October 23, 1993.
  26. The Institute of Glass and Ceramics, Madrid, Spain on May 3, 1994.
  27. National Institute of Carbon, Oviedo, Spain on May 10, 1994.
  28. International Workshop “Mullite 94”, Irsee, Germany, September 7-9, 1994.
  29. International Meeting on Metallization, Ceramic Society of Japan, Electronics Division, September 21, 1994, Kawasaki, Japan (Invited Keynote Lecture).
  30. Second International Workshop on Interfaces of Ceramic Materials, September 25-30, Iitsuna Heights, Nagano, Japan, organized by Ceramic Society of Japan, Japan Fine Ceramic Association and Ceramic Interface Research Committee, September 1994.
  31. American Ceramic Society, Pacific Coast Regional Meeting, October 19-22, 1994, Los Angeles
  32. Rockwell International Science Center, Thousand Oaks, CA, July 18, 1995
  33. 4th Japan International SAMPE Symposium & Exhibition, September 25-28, 1995, Tokyo, Japan. (Invited Keynote Lecture).
  34. Distinguished Lecture Series at National Defense Academy (NDA), Yokosuka, Japan, November 6-13, 1995.
  35. The Welding Research Institute of Osaka University, Osaka, Japan, November 14, 1995.
  36. Light Metal International Workshop on in situ Composites, Tokyo, Japan, November 15, 1995.
  37. TOTO Corporation, Kokura R&D Center, Toto Ltd., January 26, 1996, Kitakyushu, Japan.
  38. Symposium on Lead Free Solders organized by Japanese Society for Promotion of Science (JSPS), on January 29, 1996, Tokyo, Japan (Invited Keynote Lecture).
  39. Synergistic Synthesis of Inorganic Materials, Organized by Max-Planck Institute at Schloss Ringberg, Germany, March 17-22, 1996.
  40. 96th Annual Meeting of the American Ceramic Society, April 14-17, 1996, Indianapolis, Indiana.
  41. Ceramic-Metal Joining, Principal Lecturer of the course organized by the American Ceramic Society. 96th Annual Meeting of the American Ceramic Society, April 13-14, 1996, Indianapolis, Indiana.
  42. International Workshop on Ceramic Interfaces, Properties and Applications III, July 10-13, 1996, Kuranda Rainforest Resort, Cairns, Queensland, Australia
  43. Distinguished Lecture Series, presented at The Institute of Glass and Ceramics, Madrid, Spain on November 15, 1996.
  44. TOTO Corporation, Chigasaki, December 9-10, 1996
  45. Fujitsu Corporation, December 14, 1996
  46. The 2nd International Meeting of Pacific Rim Ceramic Societies, PacRim2, July 15-17, 1996, Cairnes, Australia.
  47. Institute of Materials Science, Madrid, Spain, September 1996.
  48. Institute of Glass and Ceramics, Madrid, Spain, December 1996.
  49. TOTO Corporation, 2 day seminar presented at, Chigasaki, Japan, December 1996.
  50. Fujitsu Corporation, Atsugi, Japan, December 1996.
  51. Italian Ceramics Institute, CNR-IRTEC, Faenza, Italy, February 1997.
  52. Ceramic-Metal Joining, 2 day seminar given at Sandia National Laboratories at Albuquerque, NM, April 1997
  53. International Conference on Powder Characterization for Advanced Materials Manufacture, Gijon, Spain, June 16-20, 1997
  54. Second International Conference on High Temperature Capillarity, HTC-97, Krakow, Poland, June 29-July 2, 1997.
  55. NATO Advanced Research Workshop, Interfacial Science in Ceramic Joining, Bled, Slovenia, November 12-15, 1997.
  56. Shonan Institute of Technology, Tsujido, Japan, October 1997.
  57. 6th International Symposium on Ceramic Materials & Components for Engines, October 19-24, 1997, Arita, Japan.
  58. 5th Japan International Sampe Symposium & Exhibition, October 28-31, 1997, Tokyo Big Sight, Tokyo, Japan (Opening Plenary Lecture)
  59. Max-Planck-Institut, Stuttgart, Germany, January 1998
  60. Institute of Materials Science, Seville, Spain, March 1998
  61. American Ceramic Society Meeting, May, Cincinnati, OH, 1998
  62. 9th CIMTEC-World Ceramic Congress and Forum on New Materials, Florence, Italy, June 1998.
  63. Max-Planck-Institut für Metallforschung, Stuttgart, Germany, August 1998
  64. Opening keynote lecture at International Symposium on Solid Junction, September 16, 1998, Tokyo, Japan.
  65. Fujitsu Laboratories, Atsugi, Japan, November 1998.
  66. Acta Materialia Workshop on Materials Science and Mechanics of Interfaces, October 25-30, 1998, La Jolla, California.
  67. Osaka University, Osaka, Japan, November 1998
  68. Invited lecture at National Center for Electron Microscopy, LBNL, February 19, 1999.
  69. International Symposium on Wetting, Adsorption and Segregation at Free Surfaces and Grain Boundaries, Schloss Ringberg, Germany, March 7-12, 1999.
  70. Kyushu University, April 2, 1999
  71. Invited opening lecture at International Conference on Metallurgical Coatings and Thin Films, San Diego, California, April 12-15, 1999.
  72. Ceramic/Metal Interfaces, a series of 8 lectures given at Fujitsu Corporation, Atsugi, Japan, July 12-23, 1999.
  73. Keynote lecture at 6th Japan International SAMPE Symposium, Tokyo, October 26-29, 1999.
  74. Max-Planck-Institut für Metallforschung, Inst. für Werkstoffwissenschaft, November 1999.
  75. Osaka University, Japan, March 10, 2000
  76. Japan Microgravity Center, Sapporo, Japan, March 13, 2000
  77. International Workshop on Wetting: From Microscopic Origins to Industrial Applications, May 9, 2000, Giens, France
  78. U.S. Department of Energy, Germantown, June 27, 2000
  79. International Conference on Diffusion in Materials, DIMAT2000, Paris, France, July 2000.
  80. Fujitsu Corp. Atsugi, Japan, October 2000
  81. International Conference on High Temperature Capillarity, Kurashiki, Japan, November 2000
  82. Fukuoka Institute of Technology, Fukuoka, Japan, November 2000
  83. Yamatake Corp., Fujisawa, Japan, November 2000
  84. LBNL Office in Washington, January 2001
  85. MMFX Corporation, Irvine, March 2001
  86. Workshop on Ceramic-Metal Brazing, Sandia National Lab, Albuquerque, Opening keynote lacture, April 4, 2001
  87. 45th Brazilian Ceramic Society Conference, Florianopolis, Brazil, June 2, 2001
  88. Cancun – video presentation, August 28, 2001, IUMRS Award
  89. Workshop on Oxide-Metal Interfaces, Lyon, France, October 4-6, 2001
  90. NEDO Meeting, January 21, 2002, Osaka, Japan
  91. MPI Schloss Ringberg Meeting, Science of Alumina, March 18-23, 2002
  92. NETL-DOE Meeting, Washington, DC, April 15, 2002
  93. 104th Annual Meeting of American Ceramic Society, St. Louis, MI, April 28-May 1, 2002
  94. CIMTEC Conference, Florence, Italy, July 17, 2002
  95. Department seminar, University of Santiago de Compostela, Santiago, Spain, September 4, 2002,
  96. Fujitsu Corp, October 12, 2002, Atsugi, Japan
  97. Institute seminar, Max-Planck-Institut für Metallforschung, December 3, 2002
  98. TMS Meeting, Gareth Thomas Symposium, Columbus, Ohio, October 7-9
  99. International Symposium on Scientific and Industrial Nanotechnology 2002, (ISSIN-2002), Osaka University, Osaka, Japan, December 13, 2002
  100. Department Seminar, University of California, School of Dentistry, San Francisco, January 18, 2003
  101. Plenary Lecture, Third International Symposium on Biomimetic Materials Processing (BMMP-3), Nagoya University, Nagoya, Japan, January 28, 2003
  102. Nedo Meeting, Grenoble, France, February 16, 2003
  103. International Brazing and Soldering Conference (IBSC 2003), San Diego, CA, February 28, 2003
  104. Max-Planck-Institut für Metallforschung, Stuttgart, Germany, Graduiertenkolleg Seminar, March 12, 2003
  105. Symposium on Multifunctional Materials and Structures: Present State and Future Perspectives, March 16 – 20, 2003, Max-Planck-Institut für Metallforschung, Stuttgart, Germany
  106. American Ceramic Society Meeting, Nashville, April 28-30, 2003, Manfred Ruehle Symposium
  107. American Ceramic Society Meeting, Nashville, April 28-30, 2003, Keynote lecture at Joining Symposium.
  108. Department Lecture, Institute of Materials Science, Madrid, Cantoblanco, Spain, May 22, 2003
  109. National Institute of Standards and Technology, Washington, DC, June 16, 2003
  110. Moving Interfaces in Solids, Keynote lecture, August 10 - 15, 2003, Kloster Irsee, Bavaria, Germany
  111. International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials, Kurashiki, Japan, September 24-27, 2003
  112. Composites at Lake Louise, 2003, Interfaces, within and between composites, October 19-24, 2003, Lake Louise, Canada
  113. Plenary Lecture, Morinaga Symposium, Kyushu University, October 30-31, Fukuoka, Japan, 2003
  114. Fujitsu Corporation, November 7, 2003, Atsugi, Japan
  115. LBNL Retirees Club, November 20, 2003
  116. Hitachi High Technologies America, Nanotechnology Symposium, Pleasanton, CA, November 21, 2003
  117. Berkeley Breakfast Club, Berkeley, CA, January 9, 2003
  118. Plenary Lecture, Third International Symposium on Biomimetic Materials Processing (BMMP-4), Nagoya University, Nagoya, Japan, January 29, 2004
  119. Max-Planck-Institut für Metallforschung, Stuttgart, Germany, February 11, 2004
  120. Rotary Club International, Berkeley, February 18, 2004
  121. Keynote lecture, World Congress of Oral Implantology (WCOI-6), Honolulu, Hawaii, March 8, 2004
  122. New York University, College of Dentistry, Department Seminar, March 18, 2004
  123. High Temperature Capillarity, HTC-4, San Remo, Italy, April 2, 2004
  124. Opening Plenary Lecture, Low Dimensional Materials: Present and Future Perspectives, Fundación Ramón Areces, Madrid, April 29-30, 2004
  125. EuroConference on Interfaces in Nanostructured Materials, June 6-11, 2004, Kloster Irsee, Bavaria, Germany, Keynote Lecture.
  126. Opening Plenary Lecture, Multifunctional and Functionally Graded Materials, Leuven, Belgium, July 11-14, 2004.
  127. Gordon Conference, The Solid-State Studies of Ceramics, Kimball Union, Meriden, NH, August 12, 2004, Distinguished Lecture on Biomaterials.
  128. Materials Science Colloquium, Max-Planck-Institut für Metallforschung, Stuttgart, Germany, November 8, 2004
  129. Department Seminar, University of Santiago de Compostela, Santiago, Spain, November 15, 2004.
  130. Argonne National Laboratory, Lab Seminar, December 1, 2004.
  131. Pennsylvania State University, College of Engineering, Department Lecture, December 9, 2004.
  132. Fifth International Symposium of Biomimetic Materials Processing, Nagoya, Japan, BMMP-5, January 27, 2005, Keynote Lecture
  133. TMS2005, 134 Annual Meeting and Exposition, San Francisco, February 13-17, 2005, Invited Lecture
  134. Collège de France, Laboratoire de Physique des Fluides Organisés March 25, 2005, Department Lecture
  135. Institut National des Sciences Appliquées de Lyon (INSA), March 22, 2005, Department Lecture
  136. LBNL Friends of Science, May 26, 2005
  137. International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2005, Phoenix, Arizona, June 3, 2005, Invited Lecture
  138. Fifth NIH Bioengineering Research Partnership Grantee Meeting, August 15, 2005, Bethesda, Maryland.
  139. Materials Science and Technology, 2005 Conference and Exposition, September 25-28, 2005, Pittsburgh, PA.
  140. International Symposium, Advanced materials to improve human being life conditions, Madrid, November 3-4, 2005.
  141. NIDCR-Industry Meeting: Pathway to Product Development, November 7 – 8, 2005, Bethesda, MD
  142. MRS Fall Meeting, Symposium KK, Solid-Solid Interfaces from Observation to Modeling, Boston, November 28-December 1, 2005
  143. First International Conference on Mechanics of Biomaterials & Tissues, Waikoloa Beach Marriott Resort, Hawaii, USA, 11 - 15 December 2005
  144. Fifth International Symposium on Biomimetic Materials Processing (BMMP-5), Nagoya University, Nagoya, Japan, January 26 – 28, 2005
  145. Lehigh University, Department Seminar, February 28, 2006
  146. UC Berkeley Emeriti Association, April 21, 2006
  147. UCSF Department of Orthopedic Surgery, Department Seminar, May 18, 2006
  148. Gordon Research Conference on Physical Metallurgy, Holderness School, Plymouth, NH, July 23-28, 2006
  149. Gordon Research Conference on Biomineralization, Colby-Sawyer College, New London, NH, July 30 – August 4, 2006
  150. ASME International Conference on Manufacturing Science and Engineering. October 8-11, 2006, Ypsilanti Marriot at Eagle Crest.
  151. International Conference on the Characterization and Control of Interfaces for HQ Advanced Materials, and Joining Technology for New Metallic Glass and Inorganic Materials, Kurashiki, Japan, September 6-9, 2006.
  152. International Symposium on “Center of Excellence for Advanced Structural and Functional Materials Design” Joining and Welding Research Institute, Osaka University, September 11, 2006
  153. Centre de Recherche en Modélisation Moléculaire (CRMM), Materia Nova, University of Mons, Belgium, September 21, 2006
  154. Seventh International Symposium of Biomimetic Materials Processing, Nagoya, Japan, BMMP-7, January 23-27, 2007, Keynote Lecture
  155. The Minerals, Metals & Materials Society (TMS) Annual meeting, Invited Tutorial Lecture, Biology for Materials Scientists and Engineers, Orlando, Florida, February 25, 2007
  156. International Association for Dental Research: General Session and Exhibition, Bridging the Biological and Material Science Disciplines to Build the Tooth, New Orleans, March 23-27, 2007, Invited lecture.
  157. Keynote lecture, German Physics Society Meeting, Regensburg, March 26-30, 2007, Regensburg, Germany
  158. Department Lecture, Drexel University, Department of Chemistry, April 11, 2007
  159. Department Lecture, Department of Materials Science & Engineering, UC Berkeley, April 26, 2007
  160. Keynote lecture, XII International Conference on Intergranular and Interphase Boundaries and Materials, Barcelona, Spain, July 10-13, 2007
  161. Keynote lecture, The 13 International Summer School on Crystal Growth, Park City, Utah, August 5-11, 2007
  162. Keynote lecture, European Congress on Advanced Materials and Processes, September 10–13, 2007, Nürnberg, Germany
  163. Invited lecture, Honorary Symposium: Materials and Mechanics–The Profound Influence of Tony Evans on Engineering Use of Structural Materials, MS&T07, Materials Science and Technology 2007 Conference and Exhibition, September 16-20, Detroit, MI.
  164. Distinguished Lecture Series, Ohio State University, College of Dentistry, October 17, 2007
  165. Keynote lecture, Academy of Dental Materials Conference, Tissue Engineering Scaffolds, Fort Lauderdale, October 22-24, 2007
  166. Keynote lecture, 10th Japan International SAMPE Symposium & Exhibition (JISSE-10), November 27-30, 2007, Tokyo Big Sight, Tokyo, Japan
  167. USC Department Seminar, University of Southern California School of Dentistry, Center for Craniofacial Molecular Biology, January 11, 2008
  168. Keynote lecture, 8th International Symposium on Biomimetic Materials Processing (BMMP-8), Nagoya University, January 21-24, 2008
  169. Surface Science and Catalysis Science Seminar, Materials Sciences Division, LBNL, February 14, 2008
  170. Invited lecture, TMS 2008, 137 Annual Meeting and Exposition, March 9-13, 2008, New Orleans, Luisiana.
  171. Department Lecture, University of Illinois at Chicago, College of Dentistry, May 1, 2008.
  172. Memorial Lecture, 7th International Workshop on Interfaces, New Materials via Interfacial Control, June 22-26, 2008, Santiago de Compostela, Spain, Rowland M. Cannon – Celebration of a Life in Science.
  173. Invited Lecture, 2nd International Congress on Ceramic, 29 June- 4 July, 2008, Verona, Italy.
  174. Two invited lectures at Materials Science and Technology (MS&T) conference and exhibition, October 5-9, 2008, Pittsburg, PA.
  175. Invited Lecture, 9th International Symposium on Biomimetic Materials Processing (BMMP-9), January 20-23, 2009, Nagoya University, Japan.
  176. Keynote Lecture, European Training Action on Ceramic Nanocomposites, February 23-27, 2009, Madrid, Spain.
  177. Department Lecture, Department of Materials Science and Engineering, Carnegie Mellon University, March 20, 2009, Pittsburgh, PA.
  178. Keynote Address at ASDA Research Day, University of Florida, College of Dentistry, April 8, 2009.
  179. Keynote Lecture, 2009 Research Summit, American Association of Oral & Maxillofacial Surgeons, May 7-8, 2009, Rosemont, IL
  180. Keynote lecture, International Symposium on Advanced Materials Design & Processing Osaka University, Osaka, Japan September 10, 2009
  181. Keynote lecture - Third International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials (ICCCI 2009), Kurashiki, Japan, September 6 -9, 2009.
  182. Invited Tutorial Lecture, MS&T Pittsburgh, 2009, Emerging Opportunities for Ceramic Science & Engineering, MS&T’2009, October 27, 2009, Pittsburgh, PA.
  183. Invited Lecture, 10th International Symposium on Biomimetic Materials Processing (BMMP-10), January 26-29, 2010, Nagoya University, Japan.
  184. Invited lecture, Northwestern University, March 18, 2010.
  185. Invited Keynote lecture, Interdisciplinary Research Conference on Injectable Biomaterials, 20th GRIBOI Congress, Turin, Italy, March 25-27, 2010.
  186. Invited Materials Colloqium, Max-Planck-Institute für Metallforschung, Stuttgart, May 10, 2010.
  187. Invited keynote lecture, Academy of Osseointegration Silver Anniversary Summit: Impact of Biological and Technological Advances on Implant Dentistry, August 5 – 8, 2010, Oak Brook, IL.
  188. Invited lecture, Molecular Bionics - From Biomineralization to Functional Materials, Schloss Ringberg, Germany, October 3-6, 2010.
  189. Invited Lecture, MS&T’10 Conference, George R. Brown Convention Center, Houston, Texas, October 17–21, 2010.
  190. Department Lecture, Sun Moon University, Cheonan-Asan, Korea, November 11, 2010.
  191. Opening Plenary Lecture, MRS - Korea Fall Meeting, Mujoo Resort, Korea, November 11-13, 2010.
  192. Invited Lecture, 2010 MRS Fall Meeting, Hynes Convention Center, Boston, Massachusetts, November 29-December 3, 2010.
  193. Opening Plenary Lecture, 11th International Symposium on Biomimetic Materials Processing (BMMP-11), January 25-28, 2011, Nagoya University, Japan.
  194. Invited Lecture, 2011 TMS Annual Meeting, Biological Materials Science Symposium, February 27 – March 3, 2011, San Diego.
  195. Department Lecture, UCSD, San Diego, CA, March 7, 2011.