People‎ > ‎Dr. Antoni Tomsia‎ > ‎

Full list of Dr. Tomsia's publications in proceedings

  1. J. A. Pask and A. P. Tomsia, "Wetting, Spreading and Reactions at Solid/Liquid Interfaces", in "Surfaces and Interfaces in Ceramic and Ceramic-Metal Systems", J. A. Pask and A. G. Evans Eds., Plenum Publishing Corp., 1981.
  2. H. Wohlfromm, P. Pena, J. S. Moya, A. P. Tomsia and G. Thomas, "Joining of Aluminum Titanate with Niobium", "Euro-Ceramics", The Proceedings of the 1st European Ceramic Society Conference (ECerS '89), Maastricht, The Netherlands, 18-23 June 1989.
  3. M. P. Corral, J. S. Moya, R. Martinez, and A. P. Tomsia, "Sintering of AlN Powders Obtained from Carbothermal Reduction," "Euro-Ceramics", The Proceedings of the 1st European Ceramic Society Conference (ECerS '89), Maastricht, The Netherlands, 18-23 June 1989.
  4. N. Merk, A. P. Tomsia and G. Thomas, "Analytical and High Resolution Electron Microscopy Study of Crystalline Phases Formed at Metal-Ceramic Interface", Proc. of the XIIth International Congress for Electron Microscopy, 1990 San Francisco Press, Inc.
  5. A. P. Tomsia, "Reactions During Brazing of Aluminum Nitride," Proceedings of the Solid State Reactivity Conference at Nagaoka University of Technology, October 6-7, 1992, Nagaoka, Japan.
  6. A. J. Sanchez-Herencia, R. Moreno, J. S. Moya, A. P. Tomsia and T. Tanimoto, "Microstructural and Mechanical Behavior of Al2O3/Al2O3-ZrO2 Layered Composites," Ceramic Transactions, 34, 297-304, (1993). Proceedings of the 2nd International Symposium on Functionally Gradient Materials, American Ceramic Society (1993).
  7. A. M. Glaeser, M. L. Shalz, B. J. Dalgleish and A. P. Tomsia, "A Transient FGM Interlayer Based Approach to Joining Ceramics," Ceramic Transactions, 34, 341-357 (1993) (Proceedings of 2nd International Symposium on FGM, edited by J. Birch Holt, M. Koizumi, T. Hirai and Z. A. Munir).
  8. R. E. Loehman, K. G. Ewsuk, W. G. Fahrenholtz, and A. P. Tomsia, "Synthesis and Processing of Composites by Reactive Metal Infiltration," Advanced Industrial Concepts (AIC) Materials Program Annual Progress Report for FY93, Oak Ridge National Laboratories, Oak Ridge, TN (June 1993).
  9. B. J. Dalgleish, A. P. Tomsia, K. Nakashima, M. Locatelli and A. M. Glaeser, “New Approaches to Joining Ceramics for High-Temperature Applications,” Proceedings of the 8th CIMTEC-World Ceramic Congress and Forum on New Materials, Florence, Italy, June 1994.
  10. B. J. Dalgleish, M. R. Locatelli, A. P. Tomsia, K. Nakashima and A. M. Glaeser, "Transient Liquid Phase Bonding Approaches for Ceramic Joining," pp. 165-66 in Proceedings of the First International Conference on Composites Engineering (ICCE/1), David Hui, Editor, (August, 1994).
  11. B. J. Dalgleish, A. P. Tomsia and A. M. Glaeser, "Transient Liquid Phase Bonding of Silicon Ceramics via Microdesigned Ni-Based Interlayers," pp. 555-66 in Advances in Ceramic Matrix Composites II, Ceramic Transactions, 46, (1994).
  12. M. R. Locatelli, K. Nakashima, B. J. Dalgleish, A. P. Tomsia and A. M. Glaeser, "Transient Liquid Phase Bonding of Alumina Ceramics via Microdesigned Ni-Based Interlayers," pp. 567-78 in Advances in Ceramic Matrix Composites II, Ceramic Transactions, 46, (1994).
  13. B. J. Dalgleish, A. P. Tomsia and A. M. Glaeser, "A Transient FGM Approach to Joining Si-Based Ceramics," pp. 503-08 in Proceedings of FGM-94 (Third International Symposium on Structural and Functional Gradient Materials, October 10-12, 1994, Lausanne, Switzerland), edited by N.Cherradi and B. Ilschner.
  14. M. R. Locatelli, B. J. Dalgleish, K. Nakashima, A. P. Tomsia and A. M. Glaeser, "New Approaches to Joining Ceramics for High-Temperature Applications,", Proceedings of the 8th Cimtec-World Ceramics Congress and Forum on New Materials, Florence Italy, June 29-July 4, 1994.
  15. A. P. Tomsia, J. S. Moya and F. Guitian, "Ti-based Implants Coated by Bioactive Glass," Bioceramics: Materials and Applications, G. Fishman, A. Clare and L. Hench, Eds., Ceramic Transactions, Vol. 48, 303-312, American Ceramic Society, 1995.
  16. B. J. Dalgleish, Y. Han, A. P. Tomsia and A. M. Glaeser, “Transient Liquid Phase Bonding Approaches for Si-Based Ceramics,” pp. 171-72 in Proceedings of the Second International Conference on Composite Engineering (ICCE/2), August 19-24, New Orleans, LA, David Hui, Editor, (August, 1995).
  17. B. J. Dalgleish, A. P. Tomsia, Y. Han and A. M. Glaeser, “Partial Transient Liquid Phase Bonding of Si-Based Ceramics,” pp. 93-100 in Fourth Euro-Ceramics, Coatings and Joinings, B. S. Tranchini and A. Bellosi, Eds., Gruppo Editoriale Faenza Editrice S.p.A. (1995).
  18. M. R. Locatelli, K. Nakashima, H. Mastumoto, A. P. Tomsia, B. J. Dalgleish, and A. M. Glaeser, “Partial Transient Liquid Phase Bonding of Alumina Ceramics,” pp. 109-116 in Fourth Euro-Ceramics, Coatings and Joinings, B. S. Tranchini and A. Bellosi, Eds., Gruppo Editoriale Faenza Editrice S.p.A. (1995).
  19. A. P. Tomsia and R. E. Loehman, “Bonding and Interfacial Reactions in Ceramics for Microelectronic Packaging,” pp. 11-18 in Fourth Euro-Ceramics, Coatings and Joinings, B. S. Tranchini and A. Bellosi, Eds., Gruppo Editoriale Faenza Editrice S.p.A. (1995).
  20. M. R. Locatelli, K. Nakashima, A. P. Tomsia, B. J. Dalgleish, and A. M. Glaeser, “Transient Liquid Phase Bonding of Ceramics,” pp. 157-90 in Interfaces of ceramic Materials - Impact on Properties and Applications, K. Uematsu, Y. Moriyoshi, Y. Saito and J. Nowotny, Eds. (Key Engineering Materials, 111-112, 157-90 (1995), Trans Tech Publications Ltd., Zurich (1995).
  21. A. P. Tomsia, E. Saiz, B. J. Dalgleish and R. M. Cannon, “Wetting and Strength Issues in Ceramic-Metal Bonding, pp. 347-356, in Proceedings of the Fourth Japan International SAMPE Symposium, September 25-28 (1995).
  22. W. G. Fahrenholtz, K. G. Ewsuk, R. E. Loehman, and A. P. Tomsia, "Synthesis and Processing of Al2O3/Al Composites by In Situ Reaction of Aluminum and Mullite," pp. 99-109 in “In-Situ Reactions for Synthesis of Composites, Ceramics, and Intermetallics”, ed. by E.V. Barrera, et. al., The Minerals, Metals, and Materials Society, Warrendale, PA, 1995.
  23. E. Saiz, A. P. Tomsia and R. M. Cannon, Wetting and Work of Adhesion in Oxide-Metal Systems, Ceramic Microstructures, Control at the Atomic Level, A. P. Tomsia and A. M. Glaeser, Ed., Plenum Publishing Corp. 65-82, 1998.
  24. R. E. Loehman, K. G. Ewsuk, W. F. Fahrenholtz, B. B. Lakshman and A. P. Tomsia, Reaction Mechanisms and Microstructures of Ceramic-Metal Composites made by Reactive Metal Penetration, Ceramic Microstructures, Control at the Atomic Level, A. P. Tomsia and A. M. Glaeser, Ed., Plenum Publishing Corp. 749-760, 1998.
  25. A. Pazo, E. Saiz and A. P. Tomsia, Bioactive Coatings on Ti and Ti-V-Al Alloys for Medical Applications, Ceramic Microstructures, Control at the Atomic Level, A. P. Tomsia and A. M. Glaeser, Ed., Plenum Publishing Corp. 543-550, 1998.
  26. L. Esposito, E. Saiz, A. P. Tomsia and R. M. Cannon, High-Temperature Colloidal Processing for Glass-Metal FGM’s, Ceramic Microstructures: Control at the Atomic Level, A. P. Tomsia and A. M. Glaeser, Ed., Plenum Publishing Corp., 503-512, 1998.
  27. S. Fujitsu, K. Yamagiwa, E. Saiz and A. P. Tomsia, Alumina Joining by CaO-Al2O3-SiO2 Glass, Proceedings of the 6th International Symposium on Ceramic Materials & Components for Engines, , K. Niihara et al., Eds. March 1998, pp. 316-320.
  28. A. P. Tomsia, E. Saiz and R. E. Loehman, Reactive Processing of Ceramic/Metal Composites, 6th International Symposium on Ceramic Materials & Components for Engines, K. Niihara et al., Eds. March 1998, pp. 62-66.
  29. A. P. Tomsia, E. Saiz, S. Foppiano and R. M. Cannon, Reactive Wetting: Ridging, Adsorption and Compound Formation, Proceedings of the 2nd International Conference, High Temperature Capillarity, HTC-97, N. Eustathopoulos and N. Sobczak, March 1998, pp. 59-80.
  30. E. Saiz, A. P. Tomsia and R. M. Cannon, Diffusion Processes at Liquid Metal/Ceramic Interfaces, NATO ASI Series, 3. High Technology, Vol. 58, Interfacial Science in Ceramic Joining, A. Bellosi, T. Kosmac and A. P. Tomsia Eds., Kluver Academic Publishers, 1998, pp. 161-168.
  31. E. Saiz, A. Pazo, M. Goldman, J. M. Gomez-Vega, and A. P. Tomsia, Bioactive Glass Coatings on Ti-based Implants, in Transactions of the 24th Annual Meeting of the Society for Biomaterials (1998) 243.
  32. A. P. Tomsia, Saiz, E., Foppiano, S. and Cannon, R. M., Reactive Wetting in Ceramic/Metal Systems, in Proceedings of the 9th Cimtec World Ceramics Congress, Ceramics: Getting into the 2000's, Part C, ed. P. Vincenzini, Techna srl, Italy, 1999, pp. 913-926.
  33. J. M. Gomez-Vega, E. Saiz, A. P. Tomsia, G. W. Marshall and S. J. Marshall, "A Multilayer Approach to Bioactive Glass Coatings on Ti Alloys," in Biomedical Materials-Drug Delivery, Implants and Tissue Engineering, Ed. T. Neenan, M. Marcolongo and R. F. Valentini, Mat. Res. Soc. Symp. Proc., vol. 550, pp. 349-354, 1999.
  34. D. R. Bloyer, J. M. McNaney and A. P. Tomsia, "Subcritical Crack Growth of Bioactive Glasses in Simulated Body Fluid," in Biomedical Materials-Drug Delivery, Implants and Tissue Engineering, Ed. T. Neenan, M. Marcolongo and R. F. Valentini, Mat. Res. Soc. Symp. Proc., vol. 550, pp. 355-359, 1999.
  35. E. Saiz, R. M. Cannon and A. P. Tomsia, Wetting and Diffusion Processes at Liquid Metal/Ceramic Interfaces, Proceedings of 6th Japan International SAMPE Symposium, October 26-29, 1999, pp. 863-866.
  36. Ozer, N. N. ,Cronin, J. P., Tomsia, A. P., Preparation of amorphous Al2O3 films by the sol-gel process, Solar Optical Materials XVI Denver, CO, USA 22 July 1999, SPIE-Int. Soc. Opt. Eng, Proc. SPIE - Int. Soc. Opt. Eng. (USA), pp. 77-83, 1999.
  37. J. M. Gomez-Vega, E. Saiz, M. Goldman and A. P. Tomsia, Functionally Graded Bioactive Glass Coatings on Ti-based Implants, in Transactions of the Sixth World Biomaterials Congress (2000) 263.
  38. M. Goldman, E. Saiz, J. M. Gomez-Vega and A. P. Tomsia, In Vitro Behavior of Glass Coatings on Ti6Al4V, in Transactions of the Sixth World Biomaterials Congress (2000) 980.
  39. R. M. Cannon, M. Ruehle, M. J. Hoffman, R. H. French, H. Gu, A. P. Tomsia and E. Saiz, Adsorption and Wetting Mechanisms at Ceramic Grain Boundaries, , Proceedings of the Grain Boundary Engineering in Ceramics – From Grain Boundary Phenomena to Grain Boundary Quantum Structures, Japan Fine Ceramics Center Workshop, March 15-17, 2000 in Nagoya, Japan. Ed. T. Sakuma, L. M. Sheppard and Y. Ikuhara, Ceramic Transactions, vol. 118 Grain Boundary Engineering in Ceramics, page 427-444 (2001) Published by the American Ceramic Society.
  40. A. P. Tomsia, E. Saiz, S. Fujino, T. Oku, K. Suganuma, Biomaterials Interfaces: Better Coatings for Implants, Proceedings of International Symposium on Scientific and Industrial nanotechnology, December 12, 2002, Osaka, Japan.
  41. A. P. Tomsia and E. Saiz, Biomimetic bone-like composites and novel bioactive glass coatings, Proceedings of the Third International Symposium on Biomimetic Materials Processing, January 27, 2003, Nagoya, Japan.
  42. E. Saiz, N. Rauch and A. P. Tomsia, Spreading of Sn-3Ag Solders, Proceedings of the International Brazing and Soldering Conference, San Diego, CA, February 16, 2003.
  43. L. Gremillard, S. Lopez-Esteban, R. E. Neuendorf, G. Menendez, E. Saiz, A. P. Tomsia, Development of porous ceramics for a new generation of implants, Proceedings of the CIEC 9-9th European Interregional Conference on Ceramics, Bardonecchia, Italy 2004, 369-374.
  44. J. Pavón, K. Zniber, J. Bettembourg, E. Jiménez-Piqué, M. Anglada, S. Lopez-Esteban, E. Saiz and A. P. Tomsia, Cyclic Contact Fatigue of a Glass-based Coating on Ti-6Al-4V for Biomedical Application, Proceedings of the CIEC 9-9th European Interregional Conference on Ceramics, Bardonecchia, Italy 2004, 387-392.
  45. Effect of Age-Induced Transparency on the Mechanical Properties of Human Dentin, R. K. Nalla, J. H. Kinney, J. A. Pople, T. M. Breunig, A. P. Tomsia and R. O. Ritchie, Mater. Res. Soc. Symp. Proc. Vol. 874, pages??, 2005.
  46. Varanasi, V.G.; Vallortigara, T.; Loomer, P.M.; Saiz, E.; Tomsia, A.P.; Marshall, S.J.; Marshall, G.W., “Improving biomaterials from a cellular point of view”, Materials Research Society Symposium Proceedings, 925, pp. 13-19. (2006).
  47. Deville, S.; Miranda, P.; Saiz, E.; Tomsia, A.P., “Fabrication of porous hydroxyapatite scaffolds”, Proceedings of the International Conference on Manufacturing Science and Engineering, 2006.
  48. V. G. Varanasi, T. Vallortigara, P. M. Loomer, E. Saiz, A. P. Tomsia, S. J. Marshall, G. W. Marshall, Improving biomaterials from a cellular point of view, MRS Symposium Proceedings, 925 13-19 (2007).
  49. E. Saiz, A. P. Tomsia, J. S. Lee, M. H. Mankani, S. J. Marshall, G. W. Marshall and U. G. K. Wegst. Bioinspired scaffolds for bone tissue regeneration. in Proceedings of the 2nd International Congress on Ceramics. 2008. Verona, Italy.